| Customization: | Available |
|---|---|
| After-sales Service: | Installation Guidance |
| Warranty: | 12-Month |
|
Still deciding? Get samples of US$ 1050/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The diaphragm pressure controller mainly consists of a diaphragm, a given device, and a pressure sensor. Its core working principle is to sense changes in pressure through the deformation of the diaphragm. When the pressure of the measured medium acts on the membrane, the membrane will produce corresponding displacement according to the magnitude of the pressure.
The displacement of the diaphragm is transmitted through a series of mechanical drives, ultimately triggering a micro switch to achieve the purpose of monitoring and controlling pressure by turning on or off the circuit. For example, when the pressure reaches the set upper limit, the displacement of the diaphragm causes the micro switch to act, sending a signal or controlling the relevant equipment to stop pressurizing; When the pressure drops to the set lower limit, the diaphragm resets and the micro switch returns to its initial state, allowing the equipment to be pressurized again.
| Medium | Gas or liquid |
| Shell | Die cast aluminum+epoxy resin coating |
| The outer shell of the sealing gasket | |
| Shell Grade | Compliant with IEC60529 requirements, IP65 |
| Setting Accuracy | ±0.5% |
| Differential Gap | Not adjustable (refer to the selection table data) |
| Repeatability Error | <0.5% |
| Electrical Interface | M20 * 1.5/1/2NPTF (standard) |
| Process Interface | Multiple interfaces and installation forms such as 1/2NPTF are available for selection |
| Ambient Temperature | -40ºC~+85ºC |
| Medium Temperature | -25-85 ºC (other high-temperature media can be customized upon consultation) |
| Ambient Temperature | 5%~95% |
| Service Life | 105 cycles |
| Silver plated contact imported micro switch | |
| Seismic Resistance | <Max . 2g |
| Explosion Proof Grade | Increased safety explosion-proof ExdeIICT6 Gb Vmax=380V (maximum allowable voltage), Imax=5A (maximum allowable passing current) (Please consult for special requirements) |
| Contact Capacity | |
| Explosion Proof Grade | Intrinsic safety explosion-proof: ExiaICT6 Ga Vmax=50V (maximum allowable voltage), Imax=5A (maximum allowable passing current) (Please consult for special requirements) |
| Contact Capacity | |
| Switching Output | A single pole double throw (SPDT) output switch can be connected to a "normally open" or "normally closed" type |
| Two single pole double throw (DPDT) output switches can be connected to either "2 normally open" or "2 normally closed" types |
Kexiang Automation(Shandong) Co., LTD is committed to becoming a first-class industrial Internet of things visual monitoring system solution integrator.
Kexiang Automation is located in the scenic coastal city of Yantai. Since its establishment, the company has been adhering to the "Customer first, Integrity-based" business philosophy, always adhere to the "Base on products, Build quality" business policy. Our IoT visual monitoring system is based on "Industry 4.0" and was born under the background of "Made in China 2025". It is a 5S industrial IoT control system integrating production process technology, equipment technology, automation technology, Internet operation technology and IT technology.
Our IoT visual monitoring system mainly uses the Cyber-Physical System technology(CPS) to digitize and intelligently optimize the supply, manufacturing and sales information in industrial production, and finally achieve a fast, effective, personalized and visual display monitoring effect.
Q: Are you a manufacturer or trader?
A: We are manufacturer which focuses on sensor and IoT solution provider for 10 years.
Q: How long is your delivery time?
A: It depends on the quantity. Normally it's about a week to two weeks.
Q: How to get quotation?
A: Please tell us the pipe diameter, measuring medium, flow rate, temperature, pressure, connection type and accuracy of the product you need, we will choose the most suitable product for you.
Q:Can I design our own logo or color ?
A:Sure ! we can laser mark your logo on products; OEM and ODM customization are welcomed.
Q:Can I place a small order for the first time?
A:Yes. We have no MOQ limit. Any order means your recognition of us, we believe we will have long-term cooperation.
Q: What is the warranty of your products?
A: Our warranty time is 12 months after shipment.
Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
Q: What are your terms of payment?
A: We could accept T/T, PayPal, Western Union, etc.
){kind=link}